While I was building my Panzer IVs for my German: D-Day force for the Big Four Of Late-War project I thought I would customise my Schürzen bazooka skirts a little more. One of the great things about the late-war Panzer IV kit is that it already comes with a three options for modelling your Schürzen, a clean undamaged set, a miss-aligned set with some of the plates not sitting level, and a set of rails with no plates hanging from them. You could also mix these up to give your tanks a variety of looks.
I thought I’d take things a step further, and model some of my tanks with a few plates missing. This requires no extra parts, as the kit comes with all the part you need. For this example I will use the separate rails and the plain undamaged Schürzen.
Find the matching rails and Schürzen. Like the full Schürzen, there are left and right blank rails. Look carefully, you will see the little triangles on the top of the rail are arranged differently on the left and right. There is a single triangle followed by a pair at the front of the rails, while the rear of the rails have a single triangle, followed by another single triangle.
When you have your matching pair, carefully clip off the rail moulded to the full Schürzen.
Then cut off the excess rail with your hobby knife. If doesn’t matter if you can still see the impression of where the old rail was, as this will be helpful later when gluing on the new rail. Make sure you keep pairs together, putting the wrong rail on will mean the Schürzen won’t mount properly.
Now you can cut up your Schürzen. You don’t need to cut between every single plate, just around the ones you plan to remove. Score with a sharp knife between the plates on both sides, then you can simple bend them at the join until they come apart.
Next glue the rail to the plates you want to keep. Make sure you keep the discarded plates around to help you get the spacing of the gaps right. This is where the shadow or outline of the old rail will be helpful. You can see when the triangular tags on the top of the rails were and you can line the same bits on the new rail up with these. This will help you locate the rail in the correct position.
Finally you either attach your Schürzen bazooka skirts, or like myself paint the tank and skirts separately first, before gluing them on.
~Wayne
